SV08 Max USB File:
https://drive.google.com/drive/folders/1odZvliH60p1K56TARjOTZZtYnM5vUOF5?usp=sharing
SV08 Max screen firmware:
https://drive.google.com/file/d/1XOXgKyUoE4KwEWtn1HKSe3RECwYUErIx/view?usp=sharing
SV08 Max image file(Need to use EMMC-adapter):
https://drive.google.com/file/d/1A7mfdH0gTU4VS60ker5Rnl1muqiNfMMP/view?usp=sharing
EMMC-adapter order address:
https://www.sovol3d.com/collections/fdm-parts/products/makerbase-mks-emmc-adapter-v2-usb-3-0
SV08 Open Source:
https://github.com/Sovol3d/SV08MAX
Download：https://github.com/Sovol3d/Sovol-OrcaSlicer/releases/tag/v2.3.0
Configuration files:https://github.com/Sovol3d/Sovol-OrcaSlicer/tree/main/Profiles/Sovol Profile
Document：https://github.com/Sovol3d/Sovol-OrcaSlicer/tree/main/Document
Orcaslicer import configuration file (Windows)
Orcaslicer import configuration file (Mac)
https://youtu.be/0tPTRm4jWg0?si=nUrL5Gxd2S8VHuQG
SV08 Max HDMI screen bracket：
https://drive.google.com/drive/folders/1flvkqu7ItmacuXkQFo3jHL0h_0FYz11J
SV08 Max Enclosure Kit Heightening Bracket：
https://drive.google.com/drive/folders/1SSlGW9R9QiewXaxoK2sbZ49AcT9Bg8J4?usp=sharing
SV08 MAX How to find UUID
SV08 MAX Lost communication with MCU / MCU 'extra_mcu': Unable to connect
Lost communication with MCU & Unable to connect
SV08 MAX Eddy Current Sensor Error Message
Eddy current sensor error message types
SV08 MAX Auxiliary Feeder Troubleshooting
https://youtu.be/nEvPbByr3Vc?si=AzbaOLOrG4KPaADx
## [2.1.9] - 2025-11-3
### Fixed:
- Auto home calibration position adjusted to a 30*30 ring scheme;
- Bottom-level print compensation adjusted from -0.25 to -0.2mm;
- Mainsail print progress uses slice settings by default and is synchronized with the screen;
- Fixed the issue of mismatch between preview image and print model;
- Fixed the issue of the print completion pop-up not appearing;
- Limit maximum cavity temperature setting to 60°C;
- Fixed the error issue when running M600 commands;
- Added chamber heating and auxiliary fan binding;
- Calibrate chamber temperature display;
- After first power-on or factory reset, current calibration will be performed during the boot process self-test;
- After an eddy current error, current calibration will be performed when selecting z-axis calibration on the screen.