T500 USB File: https://drive.google.com/drive/folders/1_K-P1pZ7Cp6FjC8tTyxbTgAe_HptGK23
T500 User Manual
https://drive.google.com/file/d/1H04CUNq03W9AFlHjqV6yKqBbWcnwlSDI/view
T500 deb file
https://drive.google.com/drive/folders/1Yt9YJvf4PYsZnZN0SJ2QfM854uHyY-OW?usp=sharing
T500 Image File (need emmc adapter)
https://drive.google.com/drive/folders/17r1vDM3lTmBIKE4PzFYrvf1ceU6NWhpE?usp=sharing
2.1.0-T500 2025/3/14
Optimized and upgraded according to version 2.1.0:
Repaired functions:
- Fixed the problem that the login page appears after multiple boots after flashing and the operation page cannot be entered
- Adapted to the latest OrcaSlicer T500 parameters, shielded the warning pop-up window caused by the failure to recognize commands such as G17
Tip:
There is no deb firmware upgrade package. If this problem occurs, please re-flash the image.
After completing the image refresh, the version is still 2.1.0
2.1.0-T500 2024/7/25
- Fix the issue where models over 350mm can't finish printing properly.
1.1 Users who have already flashed the 2.0.0 firmware, you can update 2.1.0 by placing the deb upgrade package on a USB drive.
1.2 Users who have not flashed the 2.0.0 image file, you can directly burn the 2.1.0 image file through EMMC module for upgrading.
2.0.0-T500 2024/6/5
- Update system from debiam-Linux to armbiam-Linux
- Klipper upgraded from 0.10 to 0.12
- KlipperScreen upgraded to the latest version and optimized UI
- Added area detection function (this function can only be used with the provided OrcaSlicer)
- UI adjustment - material change function | control function | setting function | printing function
- Updated power-off resume mode
- PID calibration | Zoffset calibration | bed_mesh calibration | factory reset to the setting interface
- Extruder | hot bed | fan | LED | one-button cooling to the XYZ mobile interface
- Added hot bed and nozzle PID detection separately to the setting interface
- Added PC stickers | PEI steel plate hot bed temperature setting to the setting interface
- Added time-lapse photography UI to support customers to export video files to USB flash drives
1.0.9-T500 2024/4/4
The default leveling and Z offset setting temperature is 60℃
Remarks:
- Adapted Orcaslicer version: 2.0.0; Platform board selection: Textured PEI Plate hot bed printing temperature 60℃
- Both the leveling and Z offset functions require the hot bed to be heated to 60℃, and there is a waiting process for the heating process. Customers need to wait and cannot operate other functions
1.0.8-T500 2024/3/28
- Add camera time-lapse shooting function
- Adapt orca slicing preview
- Change the mesh bed leveling from 77 to 1111, and probe repeatability detection
- The default leveling and Z offset temperature is 45℃
- Optimize the temperature setting waiting command for M109 and M190
Remarks:
- Adapt Orcaslicer version: 1.9.1 and 2.0.0; platform board selection: Cool Plate hot bed printing temperature 45℃
- Both the leveling and Z offset functions require the hot bed to be heated to 45℃, and there is a waiting process for the heating process. Customers need to wait and cannot operate other functions
1.0.7-T500 2023/10/20
- Reduce DDR frequency and optimize the problem of cyclic startup
- Move the Z-axis automatic calibration function to the leveling interface
Remarks:
Modify the maximum temperature of the hot bed to 60℃, and restore the factory settings to restore the maximum temperature to 85 degrees
1.0.6-T500 2023/8/16
Added prompt interface for deb package update
T500 Direct Drive Extruder: https://www.sovol3d.com/products/t500-direct-drive-extruder
T500 PEI Print Plate kit: https://www.sovol3d.com/products/t500-print-plate-kit
Comgrow T500 600W Power Supply: https://www.sovol3d.com/products/sovol-sv07-plus-600w-meanwell-power-supply
Comgrow T500 3D Printer Hardened Tool Steel Nozzles: https://www.sovol3d.com/products/comgrow-t500-3d-printer-hardened-nozzles-4pcs
Introduction to T500
Unboxing T500
Supplementary instructions for accessories in the box
Loading filament
Replacing filament
Print from SD Card
Print from Sovol Cura/Orca
First print with an internal file