Unable to enter the system using HDMI screen
1. Please check and make sure that the HDMI line connection is stable;
2. Please connect the HDMI screen line when the machine is disconnected from the power supply and restart the machine;
3.Gently remove the fan cover of the print head and check the indicator on the adapter board. If a red indicator appears on the adapter board when the printer is turned on, take a picture when the adapter board is red and send it to Sovol.
4.Please refer to the video to refresh the SV08 firmware, SV08 refresh the firmware video:
https://youtu.be/_v1JSdaGDEE?si=QBtbiteAmC9Mv8xA
If the problem still exists after re-flashing the firmware, it is recommended to refresh the image module. SV08 image file refresh tutorial video:
https://youtu.be/VGSVtdLUfgY?si=gno7bux4SpEWGTlc
5.Re-flash the image file, install the image module on the motherboard, if the first boot is stuck in the boot logo interface, please restart the machine again
6.If you have not solved the problem according to the above methods, please report your operation results to Sovol