The AB axis makes a sharp sound (during printing)
- SV08 is a high-speed 3D printer. When it moves at high speed, there will be a sound of the motor rotating at high speed. This is a normal phenomenon and will not affect printing.·
- Please check the AB axis belt of the machine and the synchronous wheel and idler wheel on the gantry. If the synchronous wheel and idler wheel are tilted and rub against the belt, or the belt is severely worn, please send the wear problem picture to Sovol.
- Please check the linear rail and slider under the AB axis profile. If there are debris and dust, please wipe them clean with a dust-free cloth, apply grease, move the slider, and ensure that the AB axis moves smoothly without jamming.
- If you have not solved the problem according to the above methods, please feedback your operation results to Sovol