Layer loss during pause and resume of print
Phenomenon:
After adding a pause command (M600) in Gcode, a gap appears when resuming printing, and a dent appears on the outer wall of the model.
Solution:
1. When M600 executes the filament replacement command, the machine will withdraw the filament for a certain distance. If M600 is added during slicing, please click Load Filament before resuming printing, wait for the filament to flow out of the nozzle, clean up the filament, and then resume printing.(If the filament flowing out of the nozzle is not cleaned, it will affect the printing of the model)
2. If do not click Load Filament, the machine will assume that the filament has been loaded when resuming printing, and continue printing. After the currently paused layer is printed (but the filament is not loaded correctly at this time), the Z axis will be automatically raised, resulting in gaps.
